Spec:

• Hardware: V2.2
• Max voltage: 13S (60V)
• Continuous Current: 150A , Max Current: 200A
• Mosfets: NVMFS5C628NLs
• LED button diameter:12mm, cable length: 250mm
• PCB thickness:4 layers*3oz copper=12oz copper
• PCB size: 40mm*32m

Enhanced Features:

• High Side Switching -> Much safer to use with multiple ESCs and other devices.
• In-rush current limiting.
  • RC delay network restricts inrush current to safe levels.
  • dV/dt is ~100V/s. At 6,000 uF output capacitance, this is an inrush current of 600mA.
• Smart Power on/off
  • Roll-to-start. Has 12 second timer after turn off. Can still be turned on by switch during this period.
  • Auto-turn-off. Will turn off automatically after 20 minutes. The output voltage must vary by at least 500mV within any three second interval to reset the turn-off timer.
  • Support momentary push button. Hold for 0.3s to turn on, 1s to turn off. Holding it down will cycle it on then off.
• High power, 150A Continuous.
• Very low idle power draw, ~300uA, will last months on battery.