Flipsky FESC6.6 mini – VESC based Motor Controller

Flipsky FESC6.6 mini – VESC based Motor Controller

Mini Size Dual FSESC6.6 Based upon VESC6 with Aluminum Heatsink

The shipping package contains:

  • 1*Dual FSESC6.6+Heatsink
  • 2*VESC Sensor Wires
  • 1*Micro USB
  • 1*Manual

Out of stock

$400.00

Out of stock

Specifications
Advanced Features
  1. Dual ESC 200A continuous output
  2. Single PCB integrating two FSESC6 circuits with internal CAN BUS circuit connection.
  3. Master and slave can be switched On/Off.
  4. Bluetooth module and RF module connections for both master and slave board.
  5. Aluminum anodized Heat sink with fins design for better heat dissipation
  6. Size with heatsink: 81x77x20mm
  7. PCB layers: 8 layers, thickness: 3oz/layer, total 24 oz thickness

Spec:

  • Hardware: V 6.6
  • EPRM:150000
  • Firmware: Latest firmware version
  • Voltage: 8V – 60V (Safe for 3S to 12S LiPo).
  • Voltage spikes may not exceed 60V.
  • Current: Continuous 100A single, total 200A ,  Instantaneous current 400A per single, total 800A for system instantaneous current.
  • 5V 1.5A output for external electronics for single.
  • 3.3V 1A output for external electronics for single.
  • Modes: DC, BLDC, FOC (sinusoidal)
  • Supported sensors: ABI, HALL, AS5047
  • 6 shunts in dual system. Each is measurable for current.
Applications

Reminder:

1. Detected battery voltage tolerance: +/-0.6V

2. This version does support setup for 4WD

 

Related products