Spintend Ubox 75V/200A Motor Controller

Spintend Ubox VESC 6
Spintend Ubox VESC
Ubox 2
$475.00

Brand: Spintend

Model: Spintend V6

Product Code: 4543

Availability: In Stock

Spintend Ubox 75V/200A Motor Controller

The Ubox is a VESC 6 based dual motor controller capable of 75V and 100A  (200A dual) suitable for up to 16S Lithium battery packs.

It features an integrated 2.4Ghz receiver and Bluetooth built in on/off switch with anti spark. 12V 3A output, 5V 1A output, output for lights and horn and dedicated BMS port. 

The Ubox comes in a cnc Aluminum housing for maximum heat dissipation, 12AWG motor wires with gold plated bullet connectors and 10AWG battery cable with XT90.

 Spintend Ubox VESC

 Technical Data:

  • Voltage :  16-75V (peak voltage should be less more than 80V)
  • Current : Max 100A/channel, the dual max 200A
  • 12V output:  Max 3A(the horn and light share this current)
  • 5V output : Max output 500mA
  • Switch button: current  Max 15mA
  • Size and weight: 145 x 83x25mm / 396g
  • Cables: Motor cable: 12AWG 12cm / Battery Cable: 10AWG 12cm

 

Youtube Esk8 Review

1. Technical Data:

  • Voltage :  16-75V (peak voltage should be less more than 80V)
  • Current : Max 100A/channel, the dual max 200A
  • 12V output:  Max 3A(the horn and light share this current)
  • 5V output : Max output 500mA
  • Switch button: current  Max 15mA
  • Size and weight: 145 x 83x25mm / 396g
  • Cables: Motor cable: 12AWG 12cm / Battery Cable: 10AWG 12cm

2. Except for Unique Features, it owns all VESC typical features:

  • TI INA240A1 Current-Sense Amplifier
  • USB, CAN, serial, I2C, SPI, 2x ADC, RC PPM inputs / outputs.
  • Sensored and sensorless FOC with auto-detection of all motor parameters
  • Hall sensor, ABI/SPI encoder
  • Current and voltage measurement on all phases
  • Regenerative braking
  • USB programmable and nice GUI
  • Adjustable protection against
  • Low input voltage | High input voltage | High motor current | High input current
  • High regenerative braking current (separate limits for the motor and the input)
  • Rapid current changes (ramping)
  • High RPM (separate limits for each direction)
  • Motor and driver overheating protection

3. Parameter setting default and max spec.

Spintend Ubox parameter setting

 

4. Custom Firmware Download: 

  1. 100A  firmware5.2 download for Ubox with Micro USB port
  2. 100A firmware 5.2 download for Ubox with Type C USB port
  3. Mail us to get 300A firmware if you need it
  4. Reminds: we recommend to use Spintend custom 100A firmware, if you're using stock firmware, there's battery voltage reading discrepancy and relative symptom. 

Marsen Energy Limited Warranty 

 

 

This limited warranty (hereinafter “Warranty”) specified below applies to Marsen Energy electrical/electronic goods. 

1. Purpose 

The primary purpose of this Warranty is to clearly define the matters related to warranty policy of Products. 

2. Warranty Condition 

2-1. Warranty Period 

The Warranty for the Products is valid for 3 months from the purchase date (the “Term of Warranty”). 

2-2. Limitation of Warranty scope 

Marsen Energy’s liability under this Warranty shall be limited to replacement, repair and refund. Replaced or repaired Products shall be warranted for the remainder of the original Term of Performance Warranty. In any event, the replacement shall not justify the renewal of the Term of Performance Warranty. 

2-3. Exclusion of Warranty 

Damage to the Products resulting from any of following activities is NOT covered by this Limited Warranty: 

  • Improper transportation, storage or installation by Buyer 

  • Modification, alteration, disassembly, repair or replace by someone other than personnel certified by Marsen Energy 

  • External influences including unusual physical or electrical stress (Lightning, flood, fire, accidental breakage, etc.) 

  • Connection to incorrect Battery, BMS, PCM or ESC. 

  • Use other than the intended use as outlined in the product description. 

3. Out of Warranty Policy 

Products damage which is not caused by seller, Marsen Energy shall provide charged service, including all the expenses of such as material cost, labor cost, warehouse cost, transportation cost, analysis cost, management cost, corporate profits, disposal expense (If necessary) and so on. 

4. Claim Payment Policy 

Claims under this Warranty must be made by notifying Marsen Energy directly. 

For a Warranty Claim to be processed, it must include following items; 

(1) Proof of the original purchase 

(2) Description of the alleged defect(s)  

(3) The relevant Product’s serial number and the initial installation date 

5. Applicable Law 

The Warranty is subject to the law of Australian State. Products come with guarantees that cannot be excluded under the Australian Consumer Law. The Buyer is entitled to a replacement or refund for a major failure. The Buyer is also entitled to have the goods repaired or replaced if the Products fail to be of acceptable quality and the failure does not amount to a major failure. The benefits to the consumer given by the warranty are in addition to any other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. This warranty only applies to the Buyer who have purchased the Products for their own use