10S BMS/PCM 10A Charge/Discharge

Bestech D725V2 1
Bestech D725V2 2
$40.00

Brand: Bestech

Model: D725V2

Product Code: 3005

Availability: In Stock

10S BMS/PCM 10A Charge/Discharge.

Suitable for small battery packs or charge only large Esk8 applications. Small form factor at only L60mm * W34mm * H10mm. Provides overcharge protection, over discharge protection, over current protection, short circuit protection, temperature protection and balancing.

Features and Benefits

1.Protection Circuit Board for 37V 10S Li-ion and Li-Polymer battery pack;

2.PCM applies for 10 cells Li-ion/Li-Polymer battery pack;

3.To prevent the battery packs from overcharge, overdischarge, over current, over temperature ,short circuit ;

4.With cell balance/equilibrium function;

5.Compatible with both Li-ion and Li-Polymer cells; 

6.How balancing function works? After battery pack is fully charged. PCM will detect each cell's voltage and trim higher voltage down until other cells reach the same voltage level.

7.PCM comes with all the voltage detection wires and connectors.

Specifications

 

Item

Contents

Criteria (Adjustable)

1

Model

HCX-D725V2

10S-10A working current

2

Voltage

Charging voltage

42V

3

Current

Maximal continuous charging current

10A

(Charge Over Current≥14A)

Maximal continuous discharging current

10A

Current consumption

≤100μA

4

Overcharge Protection

Over charge detection voltage

4.2V~4.35V(Adjustable)

Over charge detection delay time

700mS-1300mS

Over charge release voltage

4.0V~4.2V(Adjustable)

5

Over Discharge Protection

Over discharge detection voltage

2.3V~3.0V(Adjustable)

Over discharge detection delay time

0.7S-1.3S

Over discharge release voltage

2.3V~3.0V(Adjustable)

6

Over Current Protection

(1st Protection)

Over current detection current / Voltage

Adjustable 

Detection delay time

330mS±100mS

Release condition

Cut load & charge to recover

7

Over Current Protection

(2nd Protection)

Over current detection current / Voltage

Adjustable 

Detection delay time

33mS±10mS

Release condition

Cut load & charge to recover

8

Short Circuit Protection

Short circuit detection current 
(Also depends on your pack’s capacity)

Adjustable

Detection delay time

<280uS (fixed)

Detection condition

Cut load/charge to recover

9

Balance

Balance voltage for single cell

4.2v±0.05V

Balance current for single cell

42mA±5mA

10

Temperature Protection

Temperature Switch

/

NTC (10KNTC B=3435)

50°C±5°C

11

Resistance

Inner resistance

≤20mΩ

12

Temperature

Operating temperature range

0 ~ +85°C

Storage temperature range

0 ~ +85°C

13

Size (L*W*T)

L60m*W34mm*T10mm

Marsen Energy Limited Warranty 

 

 

This limited warranty (hereinafter “Warranty”) specified below applies to Marsen Energy electrical/electronic goods. 

1. Purpose 

The primary purpose of this Warranty is to clearly define the matters related to warranty policy of Products. 

2. Warranty Condition 

2-1. Warranty Period 

The Warranty for the Products is valid for 3 months from the purchase date (the “Term of Warranty”). 

2-2. Limitation of Warranty scope 

Marsen Energy’s liability under this Warranty shall be limited to replacement, repair and refund. Replaced or repaired Products shall be warranted for the remainder of the original Term of Performance Warranty. In any event, the replacement shall not justify the renewal of the Term of Performance Warranty. 

2-3. Exclusion of Warranty 

Damage to the Products resulting from any of following activities is NOT covered by this Limited Warranty: 

  • Improper transportation, storage or installation by Buyer 

  • Modification, alteration, disassembly, repair or replace by someone other than personnel certified by Marsen Energy 

  • External influences including unusual physical or electrical stress (Lightning, flood, fire, accidental breakage, etc.) 

  • Connection to incorrect Battery, BMS, PCM or ESC. 

  • Use other than the intended use as outlined in the product description. 

3. Out of Warranty Policy 

Products damage which is not caused by seller, Marsen Energy shall provide charged service, including all the expenses of such as material cost, labor cost, warehouse cost, transportation cost, analysis cost, management cost, corporate profits, disposal expense (If necessary) and so on. 

4. Claim Payment Policy 

Claims under this Warranty must be made by notifying Marsen Energy directly. 

For a Warranty Claim to be processed, it must include following items; 

(1) Proof of the original purchase 

(2) Description of the alleged defect(s)  

(3) The relevant Product’s serial number and the initial installation date 

5. Applicable Law 

The Warranty is subject to the law of Australian State. Products come with guarantees that cannot be excluded under the Australian Consumer Law. The Buyer is entitled to a replacement or refund for a major failure. The Buyer is also entitled to have the goods repaired or replaced if the Products fail to be of acceptable quality and the failure does not amount to a major failure. The benefits to the consumer given by the warranty are in addition to any other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. This warranty only applies to the Buyer who have purchased the Products for their own use