Brand: Marsen Energy
Model: 17.5Ah Carbon GT
Product Code: 0044
Availability: In Stock
Marsen Energy 36V 17.5Ah Carbon GT Electric Skateboard Battery Upgrade. It uses LG Chem MJ1 3500mAh cells in a 10S5P configuration to provide up to 50 amps continuous or 80 amps for short periods ( 2-3 mins) . The nominal voltage is 36V with a charge voltage of 42 volts so it can be charged using Evolve standard or fast charger. The cells are spot welded together with 99.9% pure Nickel strips using a commercial grade 15KVA inverter battery welder for strong quality welds. The 5P sections are joined with braided copper wire to increase flexibility of the pack as well as reducing the width of the pack. It has an 11 wire JST connector for BMS balancing (compatible with Evolve BMS) BMS not supplied, the BMS from existing Evolve battery is required. The 12AWG silicone power leads are fitted with T-style Deans connector and a high current clamp connector for a solder free fast connection. We recommend the use of a heatsink spacer to provide extra space to fit the larger battery as well as extra space for cooling. These are available from us. Spacer
Installation guide: Install guide
Please allow up to 5 days lead time as batteries are made weekly from fresh cells to ensure the highest quality product. Our batteries are not stored for weeks at a time. Special requests for different configurations or plug types can easily be arranged.
The shipping price on these batteries includes full insurance to cover for the unlikely event of damage or loss during freight.
One of the main issues with the some electric skateboard batteries is voltage sag when under high load such as going up hills. By using a higher rated cell the voltage sag can be reduced. For a more detailed explanation of voltage sag see Jay Boston's youtube clip. Voltage Sag
| Battery model | ME-CGT17500 |
| Nominal Capacity | 17500mAH |
| Nominal Voltage | 36V |
| Source resistance | |
| Cell type | LG Chem MJ1 |
| Cell configuration | 10S5P |
| Cell quantity | 50 |
| Discharge Voltage | 25V |
| Charge Voltage | 42V |
| Rated discharge Current | 50A |
| Max Discharge Current (<10s) | 80A |
| Standard charge Current | 4A |
| Fast charge current | 8A |
| Charge temperature range | 10 to +45°C |
| Discharge temperature range | -20 to +60°C |
| Storage temp range | -20 to +50°C |
| Battery dimensions | 465mm x 140mm x 19.5mm |
| Charge cycles | 300+ |
| Weight | 2.5kg |
Marsen Energy Lithium-ion Battery Limited Warranty
This limited warranty (hereinafter “Warranty”) specified below applies to Marsen Energy Lithium-ion batteries.
1. Purpose
The primary purpose of this Warranty is to clearly define the matters related to warranty policy of Products.
2. Warranty Condition
2-1. Warranty Period
The Warranty for the Products is valid for 6 months from the purchase date (the “Term of Warranty”).
2-2. Limitation of Warranty scope
Marsen Energy’s liability under this Warranty shall be limited to replacement, repair and refund. Replaced or repaired Products shall be warranted for the remainder of the original Term of Performance Warranty. In any event, the replacement shall not justify the renewal of the Term of Performance Warranty.
2-3. Exclusion of Warranty
Damage to the Products resulting from any of following activities is NOT covered by this Limited Warranty:
Improper transportation, storage, installation or wiring by Buyer
Modification, alteration, disassembly, repair or replace by someone other than personnel certified by Marsen Energy
External influences including unusual physical or electrical stress (Lightning, flood, fire, accidental breakage, etc.)
Use of an incompatible BMS, PCM, or ESC.
3. Out of Warranty Policy
Products damage which is not caused by seller, Marsen Energy shall provide charged service, including all the expenses of such as material cost, labor cost, warehouse cost, transportation cost, analysis cost, management cost, corporate profits, disposal expense(If necessary) and so on.
4. Claim Payment Policy
Claims under this Warranty must be made by notifying Marsen Energy directly.
For a Warranty Claim to be processed, it must include following items;
(1) Proof of the original purchase
(2) Description of the alleged defect(s)
(3) The relevant Product’s serial number and the initial installation date
5. Applicable Law
The Warranty is subject to the law of Australian State. Products come with guarantees that cannot be excluded under the Australian Consumer Law. The Buyer is entitled to a replacement or refund for a major failure. The Buyer is also entitled to have the goods repaired or replaced if the Products fail to be of acceptable quality and the failure does not amount to a major failure. The benefits to the consumer given by the warranty are in addition to any other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. This warranty only applies to the Buyer who have purchased the Products for their own use.
