Lumberg DC Charge port 10A with 12cm 16AWG and XT30 plug

IMG 2311

Brand: Marsen

Model: DC Charge port 10A

Product Code: 5518

Availability: In Stock

Lumberg DC Charge port 10A with 12cm 16AWG and XT30 plug

This DC power supply chassis socket is for snap-in font/side mounting with an M12 thread.

The power socket has solder eyes for quick termination, and its Nickel plated contact assures a reliable connection to corresponding DC plugs.

Features and Benefits

• Suitable for 3000 mating cycles
• Test voltage of 500 V 
• Contact Resistance < 30 mΩ


 Lumberg socket

DC Power Connector Type DC Socket
Current Rating 10.0A
Body Orientation Straight
Voltage Rating 42.0 V
Width 9.0mm
Length 16.5mm
Mounting Type Snap-In
Pin Diameter 2.5mm
Contact Plating Nickel
Contact Material Copper Tin
Series 1614

Marsen Energy Limited Warranty 



This limited warranty (hereinafter “Warranty”) specified below applies to Marsen Energy Chargers. 

1. Purpose 

The primary purpose of this Warranty is to clearly define the matters related to warranty policy of Products. 

2. Warranty Condition 

2-1. Warranty Period 

The Warranty for the Products is valid for 12 months from the purchase date (the “Term of Warranty”). 

2-2. Limitation of Warranty scope 

Marsen Energy’s liability under this Warranty shall be limited to replacement, repair and refund. Replaced or repaired Products shall be warranted for the remainder of the original Term of Performance Warranty. In any event, the replacement shall not justify the renewal of the Term of Performance Warranty. 

2-3. Exclusion of Warranty 

Damage to the Products resulting from any of following activities is NOT covered by this Limited Warranty: 

  • Improper transportation, storage or installation by Buyer 

  • Modification, alteration, disassembly, repair or replace by someone other than personnel certified by Marsen Energy 

  • External influences including unusual physical or electrical stress (Lightning, flood, fire, accidental breakage, etc.) 

  • Connection to incorrect Battery, BMS, PCM or ESC. 

  • Use other than the intended use as outlined in the product description. 

3. Out of Warranty Policy 

Products damage which is not caused by seller, Marsen Energy shall provide charged service, including all the expenses of such as material cost, labor cost, warehouse cost, transportation cost, analysis cost, management cost, corporate profits, disposal expense (If necessary) and so on. 

4. Claim Payment Policy 

Claims under this Warranty must be made by notifying Marsen Energy directly. 

For a Warranty Claim to be processed, it must include following items; 

(1) Proof of the original purchase 

(2) Description of the alleged defect(s)  

(3) The relevant Product’s serial number and the initial installation date 

5. Applicable Law 

The Warranty is subject to the law of Australian State. Products come with guarantees that cannot be excluded under the Australian Consumer Law. The Buyer is entitled to a replacement or refund for a major failure. The Buyer is also entitled to have the goods repaired or replaced if the Products fail to be of acceptable quality and the failure does not amount to a major failure. The benefits to the consumer given by the warranty are in addition to any other rights and remedies of the consumer under a law in relation to the goods or services to which the warranty relates. This warranty only applies to the Buyer who have purchased the Products for their own use